Package com.oracle.bmc.vnmonitoring.model

Class CreateIPSecTunnelBgpSessionDetails.Builder

    • Constructor Detail

      • Builder

        public Builder()

    • Method Detail

      • oracleInterfaceIp

        public CreateIPSecTunnelBgpSessionDetails.Builder oracleInterfaceIp​(String oracleInterfaceIp)
        The IP address for the Oracle end of the inside tunnel interface.

        If the tunnel's routing attribute is set to BGP (see IPSecConnectionTunnel), this IP address is required and used for the tunnel's BGP session.

        If routing is instead set to STATIC, this IP address is optional. You can set this IP address to troubleshoot or monitor the tunnel.

        The value must be a /30 or /31.

        Example: 10.0.0.4/31

        Parameters:
        oracleInterfaceIp - the value to set
        Returns:
        this builder

      • customerInterfaceIp

        public CreateIPSecTunnelBgpSessionDetails.Builder customerInterfaceIp​(String customerInterfaceIp)
        The IP address for the CPE end of the inside tunnel interface.

        If the tunnel's routing attribute is set to BGP (see IPSecConnectionTunnel), this IP address is required and used for the tunnel's BGP session.

        If routing is instead set to STATIC, this IP address is optional. You can set this IP address to troubleshoot or monitor the tunnel.

        The value must be a /30 or /31.

        Example: 10.0.0.5/31

        Parameters:
        customerInterfaceIp - the value to set
        Returns:
        this builder

      • oracleInterfaceIpv6

        public CreateIPSecTunnelBgpSessionDetails.Builder oracleInterfaceIpv6​(String oracleInterfaceIpv6)
        The IPv6 address for the Oracle end of the inside tunnel interface.

        This IP address is optional.

        If the tunnel's routing attribute is set to BGP (see IPSecConnectionTunnel), this IP address is used for the tunnel's BGP session.

        If routing is instead set to STATIC, you can set this IP address to troubleshoot or monitor the tunnel.

        Only subnet masks from /64 up to /127 are allowed.

        Example: 2001:db8::1/64

        Parameters:
        oracleInterfaceIpv6 - the value to set
        Returns:
        this builder

      • customerInterfaceIpv6

        public CreateIPSecTunnelBgpSessionDetails.Builder customerInterfaceIpv6​(String customerInterfaceIpv6)
        The IPv6 address for the CPE end of the inside tunnel interface.

        This IP address is optional.

        If the tunnel's routing attribute is set to BGP (see IPSecConnectionTunnel), this IP address is used for the tunnel's BGP session.

        If routing is instead set to STATIC, you can set this IP address to troubleshoot or monitor the tunnel.

        Only subnet masks from /64 up to /127 are allowed.

        Example: 2001:db8::1/64

        Parameters:
        customerInterfaceIpv6 - the value to set
        Returns:
        this builder

      • customerBgpAsn

        public CreateIPSecTunnelBgpSessionDetails.Builder customerBgpAsn​(String customerBgpAsn)
        If the tunnel’s routing attribute is set to BGP (see IPSecConnectionTunnel), this ASN is required and used for the tunnel’s BGP session.

        This is the ASN of the network on the CPE end of the BGP session. Can be a 2-byte or 4-byte ASN. Uses “asplain” format.

        If the tunnel's routing attribute is set to STATIC, the customerBgpAsn must be null.

        Example: 12345 (2-byte) or 1587232876 (4-byte)

        Parameters:
        customerBgpAsn - the value to set
        Returns:
        this builder