Configuring the Network

The Roving Edge serial console Network Configuration menu provides the following options to configure the device network:

                       Network Configuration
   -------------------------------------------------------------

1) Set Node IP Settings (Current Node Only)
2) Display Settings
3) Set Public IP Pool Range for Compute Instances (Cluster-Wide)
4) Display Public IP Pool Status
5) Control Network Ports
6) Configure DNS (Cluster-Wide)
7) Configure NTP (Cluster-Wide)
8) Configure Subnet Gateway (Cluster-Wide)
9) Reset Network
10) Configure Ethernet Bonding
11) Configure Internet Proxy
12) Help

Options 1 through 8: Use to display and configure the Roving Edge device networking parameters. Some network parameters are initially configured when you self-provision the device (described in Self-Provision the Roving Edge Device). Use these options if you need to make changes. See Configuring Device Networking.

Reset Network: Use to reset the network.

Configure Ethernet Bonding: Use to configure Ethernet bonding to use multiple NICs to connect to your network. See Managing Ethernet Bonding.

Configure Internet Proxy: Use to enable or disable an internet proxy that allows a Roving Edge device to communicate with OCI service endpoints when running behind firewalls. See Managing the Internet Proxy.